houseofnanax.blogg.se

1. NAS HP MEDIASMART SERVER EX470 UPDATE THE UNIT
2. NAS HP MEDIASMART SERVER EX470 UPGRADE THE MEMORY
3. NAS HP MEDIASMART SERVER EX470 PASSWORD I SET

I got me a Generation 4 MediaSmart Server Debug Board made by Charles Kalapati's company VOV Technology. Hello FreeBSD 10.1-RELEASE 64 bit on my HP MediaSmart Server EX470. Bye bye Microsoft Windows Home Server.

×.To start off with, you need access to a normal computer from which to prepare the install media. Great seller with very good positive feedback and over 50 ratings. Best quality when compared to PicClick similar items.

Nas Hp Mediasmart Server Ex470 Password I Set

Powering on the home server, I repeatedly tapped F12 for 10 seconds. Using the root password I set during the installation process, I logged in and deleted the existing network configuration with the following command:Rm /etc/udev/rules.d/70-persistent-net.rulesI removed all existing hard drives and inserted the flash drive into the bottom most rear USB port.I plugged a USB keyboard into the front USB port. The ISO image is an installer drive, and it'll then install OpenMediaVault onto your second flash drive.Once I had OpenMediaVault installed on my second flash drive, I booted it on my regular computer. Hp mediasmart server ex470 freenas manual She bought vegetables.Download the ISO image of OpenMediaVault.My other computer was on Windows, so I then used to restore the image onto the flash drive.The wiki installation instructions weren't clear on this, but you'll then need a second flash drive on which to install OpenMediaVault. Open source operating system on Linux for the enterprise server, desktop.

The process was developed by people who hacked VGA output into their servers.After a minute or two, I connected to the home server's IP address from a web browser, and the OpenMediaVault interface came up!However, you'll note that only the bottom and third from the bottom drive bays are functional. Doing this a single time seems to apply it every time in the future, as my home server always boots from the USB drive now. After that, I carefully hit the down arrow on the keyboard exactly 7 times, which apparently selects the USB boot option, and then hit enter. There is no harm in over pressing F12, so you can keep pressing to be sure.

OMV doesn’t support UEFI and the install-stick will not boot on UEFI systems. It’s early days, but it seems to run smoothly now.- booting from one USB stick to create another wasn't that easy, since all my PC's use UEFI. I followed your instructions and installed OMV on the device. As a result, if the server is unplugged for an extended period, it will lose the BIOS settings, and I need to set the BIOS ATA mode again to re-enable drive bays 2 and I doubt if you still follow this thread, but in case you do:I had an old EX490 lying around with some extra RAM installed (and I think I replaced the CPU years ago). This appears in OpenMediaVault as a 250MB drive connected to /dev/sda.My HP Mediasmart is old enough that the CMOS battery is worn out.

Do you know if the box supports larger drives with OMV installed?This site has given me a lot of insight into the conversion of the HP Home Media Server I have a EX470 which I pick up on eBay earlier this year. Thanks for your excellent descriptions on what to do!One question long ago, when I used this box for Windows Home Server, a 2TB drive was the maximum supported capacity. To my surprise, I didn't need to all 4 bays are active and accessible without any changes.I could not have gotten this far without your article. However much I tried, I couldn’t get the health light to stop blinking. I couldn't get there using the trick you describer. That worked- I read the stuff about having to get into the bios to het the upper two bays to work.

Nas Hp Mediasmart Server Ex470 Update The Unit

I read about the constant update the unit does and that the OS is on a flash Rom. But no, so rethink, then I thought about Openmediavault. In comes a HP Media server which silly me thought I may be able to get it to work with W10.

I then booted the unit with 1Tb Drive in IDE 2 Master and still when it come to the system disc being formatted and portioned no go.Then I decided to try something new, with a reconfiguration to the boot order I set 1 st boot USB external, 2nd boot HDD and all following boot devices disabled. So sitting down with a cup of tea and thinking about it, I decided to boot the box and move the disc about each boot cycle and I found the the bottom slot in the box was the IDE 2 Master next one up was the Slave, then third slot up was IDE 3 then top slot was IDE 3 Slave. When it came to the setup point were the primary disc is partitioned the setup could not find a disc in the top slot. Then booted the gem up, I was surprised to find the IDE set up in the Cmos consisted of not only the four drives in the bays but, as follows:Plus a 247 MiB USB Disk Serial No AA04012700036216 hiding somewhere in the box.Anyway I was lead to understand that the uppermost disk was the primary Sata Disc, so after about 30 times of trying to load openmediavault on to the disc with no luck.

The system rebooted OK I then configured the 3 x 3TB drives as ext4 File system not a Raid 5 which I wanted to do but I would have lost to much room, I have since backed up all my movies and 20% of my TV Recordings a total of 1.5Tb. On reboot I once again checked the Cmos settings to make sure they had not reset, all was good, so on with the reboot. I then Shut the system down and hoped it would reboot once I had fitted the other 3 Drives (3Tb HDD’s) into the unit. When the install was completed I checked the drives in Openmediavault it showed the 1Tb HDD with the system on it and a USB Disk 247.50MiB disc which I did not mount in Openmediavault. The part of the setup arrived at the HDD format and partitioning and there was the drive, I clicked continue and away it went to complete the install.

Nas Hp Mediasmart Server Ex470 Upgrade The Memory

It is still in the process of being loaded with data and is performing well with access the the filing system from windows desktop works well. The Linux system has updated a few times but not Vista. On the boot into Linux it does show widows Vista in the background but nothing else. The noticeable thing is, it has been running now for a few weeks, a number of times been rebooted and no time has it tried to update its self. To do this on any HP Media Server it is necessary to have a header cable the upload cannot be done without it unless you like a lot of frustration and hassle. I have yet to upgrade the Memory chips to 4Gb from 2Gb the CPU seems fast enough no stream to the TV or any of the PC, Laptops or Tablets.